Feuling 3088 Black Aluminum Vented Oil Dipstick 17-20 Harley M8 Touring

Description

Product Description:
Screws into the factory oil fill spout as a stock replacement part on M-Eight baggers
This breathing dipstick removes unwanted build-up of blow by, which is found in engines with excessive leakdown through the rings/cylinders (a common issue with large displacement big bore engines)
Test results show a decrease in engine sump oil levels
Dipstick vents excessive pressure from the oil tank through a breather system consisting of a filter element and umbrella valve
Choose from two venting style options when installing the dipstick
Option 1 is to use the 1/8​"​ NPT breather vent fitting with internal porous filter element (this option gives a clean look; however it can produce an oil misting/residue out of the element on engines with excessive leakdown/blow by)
Option 2 is to use a quick-disconnect coupler fitting with rubber hose and filter element (this option will run any excessive oil misting/residue through the line and into the filter element, but does requires disconnecting the fitting in order to check the oil)
For option 2, Feuling recommends routing the line up the frame rail, up under the seat/abs area then back down along the right side frame rail and the filter element can fit cleanly between the engine/trans matting area on the inside of the lower right frame rail
There are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) or the bike upright and level (FHU)
If reading the dipstick with the bike on the jiffy stand you will take your reading from the dimples labeled FHS (Full Hot Stand)
When reading the dipstick with the bike upright and level you will take the reading from the dimples labeled FHU (Full Hot Upright)
Available in polished or fade-resistant black
Made in the U.S.A.
NOTE: This dipstick does get hot; use a glove when checking oil level.
NOTE: Feuling highly recommends staying off the rev limiter and running conventional oil in the M-Eight engines to help maintain ring seal and minimize blow by.
NOTE: It is important to get the correct hot oil level in your bike. Feuling recommends running the oil level 90%-99% full when hot.
NOTE: The oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank.
Specs:
Color/Finish: Black
Material: Aluminum
Product Name: Oil Dipstick
Riding Style: Street
Units: Each
Disclaimer: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE. Not legal for sale or use on any EPA pollution controlled motor vehicle.
Item Fitment:
2017-Up Harley Davidson M8 Touring
Part Number:
FMC-3088
Retail: 279.95
Sales Tax:
Please reference the EBay Tax Table for all tax calculations
Customer Service:
Here at Eastern Performance Cycles we look forward to helping you with any questions or concerns during your purchase.
Hours: Mon- 8am to 5pm / Tues-Fri 8am to 5:30 pm EST
Tracking Numbers will be given during business hours listed above
Damages & Warranty
Before you unwrap your parts double check your fitment and once unwrapped, look the item over before trying to install it. We want every customer to be 100% satisfied with their purchase and know that all parts are fully warranted by the manufacturer.
Damages & Warranties
Damaged Shipments:
Do not accept delivery from the carrier if the box has been damaged. If you can snap a picture of the damage and notify us ASAP we can replace the order right away. If you find shipping damage while opening your package be sure to keep all packing material and the shipping box so we can open a claim for you. Notify us right away so we start the process.
Missing Items or Wrong Item Received:
Keep the box, packing material, all shipped parts and contact us right away.
Warranties:
All products are warranted against manufacturer’s defects. Increasingly, many of our manufacturers handle claims directly to speed up the process of exchange or sending replacement parts. We’re happy to step in and get the ball rolling. Electronic parts must go back to the manufacturer for bench testing. Because issues are often solved over the phone with tech support, call the manufacturer first and be sure to get the name of whoever you speak with if you need to contact us.
Resolution Process:
Business hours (8:00-5:00 pm EST) will get the resolution process going right away. After hours please email us so we know first thing in the morning there is a problem and we will contact you promptly.
Shipping:
Free Shipping:
applies to the lower 48 United States only.  Canada, Alaska, Hawaii, APO’s and Puerto Rico are not part of the lower 48 states and will be invoiced separately for shipping.
Most items will ship same day as long as the payment is received by
2 PM EST
. Otherwise the item will ship next day or in accordance with the handling time. Handling times do not include weekends or holidays.
Be aware of handling times prior to purchase. While most items ship out the same day this might not always be the case. Expedited shipping is available but must be arranged prior to shipment.
Shipping method will either be USPS or UPS and it is determined by Eastern Performance's customer service team based on the best price with the safe arrival of the package in mind.
Make sure your Paypal confirmed address is up to date prior to purchase. For the protection of buyers and sellers we cannot make any changes after purchase.
If an item is out of stock or oversold, buyers will be notified immediately and refunded for the item. An estimated restock date will be provided at the time of cancellation.
International Custom's Fees and Taxes are paid by the receiver and Eastern Performance will not be able to modify the listed value of the item to avoid these fees. Please contact your local government for the cost of these fees.